Patterning catalyst via inkjet printing to grow single-walled carbon nanotubes

We demonstrated a method to pattern catalyst via inkjet printing to grow SWNTs, using metal salt solutions as the inks and an ordinary office-use printer. We printed water solutions of cobalt acetate on hydrophilic Si substrates and grew high quality SWNT films.     

Amplitude death islands in globally delay-coupled fractional-order oscillators

Nonlinear Dynamics - In this paper, amplitude death (AD) is investigated theoretically and numerically in N globally delay-coupled fractional-order oscillators. Due to the presence of...     

Two alternating direction implicit spectral methods for two-dimensional distributed-order differential equation

Numerical Algorithms - In this paper, two alternating direction implicit Galerkin-Legendre spectral methods for distributed-order differential equation in two-dimensional space are developed. It is...     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611     

The catalytic performance study of polymerized ionic liquid synthesized in different conditions on alkylation of o‐Xylene with styrene

In this work, a series of novel acidic polymerized ionic liquids were used as heterogeneous catalyst for alkylation of o‐Xylene with styrene. And the effect of the amount of initiator and the type of acid used for ion exchange on catalyst structure and the catalytic performance of catalysts for alkylation were studied thoroughly. The experiment results show: when the percentage of the amount of initiator in the total material is 3%, the polymerized ionic liquid catalyst MPM‐SO₃H‐[C₃V][SO₃CF₃] has the most uniform with a specific surface area of 97.30 m²/g and a pore volume of 0.35 cm³/g. Benefiting from the unique structure features, MPM‐SO₃H‐[C₃V][SO₃CF₃] manifested an excellent catalytic performance for alkylation of o‐Xylene with styrene, along with the conversion of styrene was 96.8% and the yield of 1‐Phenyl‐1‐ortho‐xylene ethane was 94.7%. Therefore, this work provides a novel reference to the synthesis of polymerized ionic liquids and clearly explains the advantage of novel acidic polymerized ionic liquids on alkylation.     

In Vitro Antifungal Activity and Mechanism of Ag3PW12O40 Composites against Candida Species

Fungal infections pose a serious threat to human health. Polyoxometalates (POMs) are metal–oxygen clusters with potential application in the control of microbial infections. Herein, the Ag₃PW₁₂O₄₀ composites have been synthesized and verified by Fourier transform infrared (FT-IR) spectrum, transmission electron microscopy (TEM), scanning electron microscope (SEM), elemental analysis, and X-ray diffraction (XRD). The antifungal activities of Ag₃PW₁₂O₄₀ were screened in 19 Candida species strains through the determination of minimum inhibitory concentration (MIC) by the microdilution checkerboard technique. The minimum inhibitory concentration (MIC₅₀) values of Ag₃PW₁₂O₄₀ are 2~32 μg/mL to the Candida species. The MIC₈₀ value of Ag₃PW₁₂O₄₀ to resistant clinical isolates C. albicans HL963 is 8 μg/mL, which is lower than the positive control, fluconazole (FLC). The mechanism against C. albicans HL963 results show that Ag₃PW₁₂O₄₀ can decrease the ergosterol content. The expressions of ERG1, ERG7, and ERG11, which impact on the synthesis of ergosterol, are all prominently upregulated by Ag₃PW₁₂O₄₀. It indicates that Ag₃PW₁₂O₄₀ is a candidate in the development of new antifungal agents.     

甲基环己烷在9∽15.5 eV能量区的真空紫外光电离研究

利用具有同步辐射源的反射式飞行时间质谱仪，研究甲基环己烷的真空紫外光电离和光解离. 观测到母体离子C₇H₁₄⁺和碎片离子C₇H₁₃⁺，C₆H₁₁⁺，C₆H₁₀⁺，C₅H₁₀⁺，C₅H₉⁺，C₄H₈⁺，C₄H₇⁺和C₃H₅⁺的光电离效率曲线. 测定甲基环己烷的电离能为9.80±0.03 eV，通过光电离效率曲线确定其碎片离子的出现势. 在B3LYP/6-31G(d)水平上对过渡态、中间体和产物离子的优化结构进行表征，并使用G3B3方法计算其能量. 提出主要碎片离子的形成通道. 分子内氢迁移和碳开环是甲基环己烷裂解途径中最重要的过程.     

Low‐Fouling Electrosprayed Hemoglobin Nanoparticles with Antioxidant Protection as Promising Oxygen Carriers

Despite all the attempts to create advanced hemoglobin (Hb)‐based oxygen carriers (HBOCs) employing an encapsulation platform, major challenges including attaining a high Hb loading and long circulation times still need to be overcome. Herein, the fabrication, for the first time, of nanoparticles fully made of Hb (Hb‐NPs) employing the electrospray technique is reported. The Hb‐NPs are then coated by antioxidant and self‐polymerized poly(dopamine) (PDA) to minimize the conversion of Hb into nonfunctional methemoglobin (metHb). The PDA shell is further functionalized with poly(ethylene glycol) (PEG) to achieve stealth properties. The results demonstrate that the as‐prepared Hb‐NPs are hemo‐ and biocompatible while offering antioxidant protection and decreasing the formation of metHb. Additionally, decoration with PEG results in decreased protein adsorption onto the Hb‐NPs surface, suggesting a prolonged retention time within the body. Finally, the Hb‐NPs also preserve the reversible oxygen‐binding and releasing properties of Hb. All in all, within this study, a novel HBOCs with high Hb content is fabricated and its potential as an artificial blood substitute is evaluated.     

Copper-Catalyzed Regioselective [3+3] Annulations of Alkynyl Ketimines with α-Cyano Ketones: the Synthesis of Polysubstituted 4H-Pyran Derivatives with a CF3-Containing Quaternary Center

Regioselective [3+3] annulation of alkynyl ketimines with α-cyano ketones for the synthesis of polysubstituted 4H-pyran derivatives with a quaternary CF₃-containing center has been realized by using Cu(OAc)₂ as the catalyst. The novel strategy tolerates a wide range of α-CF₃ alkynyl ketimines and α-cyano ketones with both aryl and alkyl substitutents. A preliminary asymmetric synthesis of chiral product 3 has been attempted by using copper and chiral thiourea as the cocatalyst with excellent yields (86-99 %) and good enantioselectivities (71–78 % ee). Furthermore, product 3 aa could be obtained on a gram-scale reaction with 75 % yield and 99 % ee after recrystallization. Several products were also transformed readily. Control experiments indicate that the reaction involves a process with a base-catalyzed or chiral thiourea-catalyzed Mannich-type reaction followed by a highly regioselective copper-catalyzed ring-closing reaction on the alkynyl moiety in a 6-endo-dig fashion.